JapanPoliceman,
Ничего не получилось!
Вот детальный отчёт от проги НЕРО 6 :
NIKK
SOPRUT
1A23-0030-2023-9248-4386-3781
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File "C:Program FilesAhead
eroWnaspi32.dll": Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 15:25:04
Версия Nero: 6.0.0.19 (Nero Express)
Рекордер: <AOPEN COM4824/AAH> Версия: 1.04 - HA 1 TA 1 - 6.0.0.19
Драйвер адаптера: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX1611 >Версия: TYS3 - HA 1 TA 0 - 6.0.0.19
Драйвер адаптера: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX1611 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN COM4824/AAH atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX1611 D: CDRom0
AOPEN COM4824/AAH E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261612kB)
Free physical memory: 36MB (37584kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.3.2005
CD-ROM (ISO)
21:42:50 #1 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:42:50 #2 Phase 75 File dlgbrnst.cpp, Line 1843
JustLink активен
21:42:50 #3 Text 0 File Reader.cpp, Line 118
Reader running
21:42:50 #4 Text 0 File Writer.cpp, Line 127
Writer AOPEN COM4824/AAH running
21:42:50 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
21:42:50 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media
21:43:00 #7 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 358593 (79:43.18)
21:43:00 #8 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE
21:43:01 #9 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: AOPEN COM4824/AAH;
CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 25 (LI 97:15.37), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
21:43:01 #10 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
21:43:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 358594 (358594) = #358594/79:41.19
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358592 blocks [AOPEN COM4824/AAH ]
--------------------------------------------------------------
21:43:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [AOPEN COM4824/AAH ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734707712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
358594 | lead-out | 1 | 0x00 | 0x41
21:43:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 965
Removed 2 run-out blocks from end of track 1.
21:43:01 #14 Phase 24 File dlgbrnst.cpp, Line 1843
Старт кэширования файлов
21:43:01 #15 Phase 25 File dlgbrnst.cpp, Line 1843
Кэширование файлов завершено
21:43:01 #16 Phase 36 File dlgbrnst.cpp, Line 1843
Старт прожига на 48x (7*200 Кб/с)
21:43:01 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:43:02 #18 Text 0 File Mmc.cpp, Line 19195
Set BUFE: JustLink -> ON , JustSpeed : ON
21:44:52 #19 SCSI -1135 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04980000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xDD 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
21:44:52 #20 CDR -1135 File Writer.cpp, Line 335
Ошибка записи
21:44:52 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:44:52 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:44:52 #23 CDR -201 File WriterStatus.cpp, Line 193
Неправильное состояние записи
AOPEN COM4824/AAHH1 T1
21:44:52 #24 TRANSFER -18 File WriterStatus.cpp, Line 193
Не могу выполнить EndTrack
21:44:52 #25 Text 0 File Mmc.cpp, Line 14149
<AOPEN COM4824/AAH > start Close Session
21:44:54 #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
21:44:54 #27 Phase 38 File dlgbrnst.cpp, Line 1843
Прожиг завершился неудачей на 48x (7*200 Кб/с)
Existing drivers:
File "Driversatapi.sys": Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.08.2002 1:27:50 (Adapter driver for rec)
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
Правда я в нём ничего не понял! :roll: